MCIM9070 2 Liteishene Thermoformer
Lintlha tsa Mochini
Tšebeliso
Mochine ona o etselitsoe ho hlahisa lijana tsa boholo ba liphutheloana, ka mofuta o bulehileng o nang le lebota le tšesaane, ka ho sebelisa roll-sheet, tlas'a ts'ebetso e phahameng ea "vacuum suction-forming process".Lihlahisoa tse entsoeng ke mochini ona li ka sebelisoa bakeng sa sephutheloana sa lijo, thepa ea bahahlauli, masela, bongaka, lintho tsa ho bapala, litlolo, lisebelisoa tsa motlakase le li-hardware tse sebelisoang letsatsi le letsatsi, jj.
Leqephe le Loketseng
Lipampiri tsa depositi ea starch, lakane ea depositi e bobebe, leqephe la tikoloho, APET, PETG.PVC, HIP, PET, PS, OPS, joalo-joalo.
Likarolo tsa Sebopeho
Motsoako oa mechine, oa pneumatic le oa motlakase, liketso tsohle tse sebetsang li laoloa ke PLC.Sesepa sa ho ama se etsa hore ts'ebetso e be bonolo hape e be bonolo.
Mofuta oa ho etsa: khatello le ho etsa vacuum
Mofuta oa ho theha hlobo holimo/tlase.
Ho fepa ka motlakase oa Servo, bolelele ba phepo bo ka fetoloa hanyane ka hanyane.Lebelo le phahameng le le nepahetseng.
Hitara e holimo e nang le likarolo tse 3 tse futhumatsang, hitara e tlase e nang le likarolo tse 3 tse futhumatsang.Ka lakane bohale preheating.
Ka lakane bohale preheating.Qoba lakane e robehileng.
Heater e nang le sistimi ea taolo ea mocheso oa bohlale, phepelo ea boiketsetso ea taolo ea hitara ea motho ka mong.Ho futhumatsa ka potlako (metsotso e 3 ho tloha ho 0-400 degree), e ke ke ea hlahisoa ke motlakase oa kantle
Seteishene sa ho etsa le ho seha se bulehileng / se koalehileng hlobo se laoloang ke servo motor, ho nepahala ho phahameng.lihlahisoa ka tsela e iketsang accounting tlhahiso.
Mofuta oa stacking: stacking tlase / manipulator stacking.
E na le lintlha tsa lihlahisoa le ts'ebetso ea ho hopola lintlha.
Ka tsamaiso ea hlobo e fetohang ka potlako, e sebetsa hantle haholoanyane.
Bophara ba ho fepa bo ka fetoloa ka mokhoa o ts'oanang kapa ka boikemelo ka tsela ea motlakase.
Mofuthu o sutumelletsa kantle ha lakane e chesa haholo.
Auto roll sheet loading, fokotsa mosebetsi o boima.
Tekheniki Parameter
| Bophara ba leqephe (mm) | 590-940 | |
| Botenya ba leqephe (mm) | 0.1-1.5 | |
| Boholo ba bophara ba lakane (mm) | 800 | |
| Ho etsa mold stroke (mm) | Phahamisa hlobo 170, Ho theoha hlobo 170 | |
| Ho notlela hlobo matla (ton) | 80 | |
| Sebaka se phahameng sa ho theha (mm2) | 900×700 | |
| Sebaka sa ho etsa bonyane (mm2) | 550×400 | |
| Ho etsa bophara ba hlobo (mm) | 550-900 | |
| Ho etsa bolelele ba hlobo(mm) | 400-700 | |
| Botebo bo boholo/bophahamo (mm) | Manipulator : 90 / 80; Stacking tlase: 155/155 | |
| Ho khaola matla (ton) | 90 | |
| Stacking tsela | Ho koaleha ka tlase (tla-tlase) / Manipulator stacking | |
| Nako ea potoloho (potoloho/ mets) | Manipulator: Max20; Ho bokellana ka tlase: Max40 | |
| Setsi sa Pholiso | Pholiso ea metsi | |
| Phepelo ea moea | Bophahamo (m3/ mets) | ≥5 |
| Khatello (MPa) | 0.8 | |
| Pompo ea vacuum | Busch R5 0100 | |
| Phepelo ea motlakase | 3 mohato 4 mela 380V50Hz | |
| Matla a heater (kw) | 145 | |
| Matla a akaretsang (kw) | 190 | |
| Boemo (L×W×H) (mm) | 11040×3360×3100 | |
| Boima ba 'mele (Ton) | ≈15 | |
Tekheniki Configuration
| PLC | Delta ea Taiwan |
| Touch Screen Monitor ( 15 ″ inch / Color) | Delta ea Taiwan |
| Ho fepa servo motor (5.5kw) | Delta ea Taiwan |
| Ho theha servo motor ea holimo / tlase (7.5kw) | Delta ea Taiwan |
| Plug Assist servo motor(7.5KW) | Delta ea Taiwan |
| Mofuthu (288pcs) | Jeremane Elstein |
| Contactor | Switzerland ABB |
| Relay ea Thermo | Switzerland ABB |
| Relay | Jeremane Weidmuller |
| SSR | Switzerland Carlo Gavazzi |
| Pumpu ea Vacuum | Jeremane Busch |
| Moea oa moea | JAPANE SMC |
| Silinda | JAPAN SMC & Taiwan Airtac |
Hobaneng o re khetha
Lihlahisoa tsa theknoloji, matšoao a moruo a fihlile boemong ba naha, bo bapisoang le mofuta o tsoetseng pele oa kantle ho naha, ka 2006 ka ISO9001: 2000 setifikeiti sa tsamaiso ea boleng, lihlahisoa tse rekisoang ka ho fetisisa tsa limmaraka tsa malapeng le tsa linaheng tse ling, tse tšeptjoang ka ho tebileng ke basebelisi.
Mehlala ea Litšoantšo
Litšoantšo tsa setshelo
