QZC50-80/120-CWF Thermoformer
Lintlha tsa Mochini
Ke, Sebopeho
01. Motsoako oa mechine, pneumatic le motlakase.Liketso tsohle tse sebetsang li laoloa ke PLC e nang le skrine ea ho ama, e bonolo haholo ebile e bonolo ho sebetsa.
02. Ho fepa ka motlakase oa Servo, bolelele ba ho fepa bo lokisoa ntle le mehato, e potlakileng le e nepahetseng.(Boholo. lebelo:1000mm/s)
03. Heater e nang le sistimi ea taolo ea mocheso e bohlale e ka fana ka taolo ea heater ka bo eona, e loketseng ho ts'oana ha mocheso. Sistimi ena e na le melemo ea ho sebetsa habonolo, ho bonolo, ho futhumala ka potlako (metsotso e 5 feela ho tloha ho 0-400degree), e tsitsitseng (e hapileng" t e hlahisoa ke motlakase oa kantle, ho feto-fetoha ha mocheso ho tlase ho 1 degree), ho boloka matla (hoo e ka bang 15%) le bophelo bo bolelele ba tšebeliso ea li-firebacks.
04. ]Sefuthumatsi se habeli (holimo le tlase) se nang le lisebelisoa tsa ho futhumatsa mocheso.
05. Ka lisebelisoa tsa ho lemoha le ho sireletsa lakane e omileng.
06. Letlapa la lijo pele ho nako.Mochini o na le ts'ebetso ea memori e ikemetseng ea nako ea ho futhumatsa ho etsa hore mochini o fihle maemong a tloaelehileng a ho sebetsa qalong.
07. Ho lieha ha hlobo.
08. Ho theha hlobo ho ea holimo le tlase ho sebelisa pneumatic double elbow system le guide bushing e sebelisa inlay bearing with solid lubricant(JFB) ho etsa hore hlobo e holimo le tlase e sebetse ka mokhoa o tsitsitseng le ka nepo.Mold clamping force e kholo ebile e ntle bakeng sa ho ntlafatsa boleng ba lihlahisoa.
09. Heater ka tsela e iketsang push-out tshebetso etsa hore ho khonehe ho pur off le ka mochine ntle le seha lakane nakong ea tshebetso ya tlhahiso, ka nako eo pholosa lakane.
10 .Mefuta e holimo le tlase e sebelisa sistimi ea ho lokisa motlakase, e lebelo le holimo ebile e bonolo.
11. Ka potlako fetola thepa hlobo, pneumatically clamping.
12. The up hlobo e hlomella mothusi ea otlollang moqomo oa moea 'me hlobo e tlase e hlomella mothusi oa ho theola moqomo oa moea.
13. Ho theha ho na le mefuta e mengata e lokelang ho khethoa --- ho etsa vacuum, ho etsa khatello, vacuum le ho etsa khatello.
14. Roala lakane ka tsela e iketsang, fokotsa matla a mosebetsi.
II, Technical Parameter
| Paramethara | QZC50-80/120-CWF (mofuta oa No.) | |
| Leqephe le fumanehang(mm) | 500-760 | |
| Botenya ba leqephe(mm) | 0.3-1.5 | |
| Max.dia.moqolo oa lakane(mm) | 600 | |
| Ho otla ha hlobo(mm) | 130 | |
| Ho theoha ha hlobo (mm) | 130 | |
| Boholo.sebaka sa ho theha(mm2) | 720×750 | |
| Bophahamo bo phahameng.(mm) | 70 | |
| Boholo.botebo ba ho theha(mm) | 100 | |
| Bokhoni (Baesekele/mots) | 6-16 | |
| Mohloli oa Khase | Phepelo ea moea (m3/mets) | ≥3 |
| Khatello(MPa) | 0.8 | |
| Tšebeliso ea metsi | 4-5 Cube / Hora | |
| Pompo ea vacuum | Busch R5 0100 | |
| Matla | 380V/220V 50Hz | |
| Matla a futhumatsang (Kw) | 86.4 | |
| Matla a motlakase (Kw) | 8 | |
| Matla a akaretsang (Kw) | 96 | |
| Boemo (L×W×H)(mm) | Hoo e ka bang 7500×1800×2300 | |
| Boima (Kgs) | Hoo e ka bang 7800 | |
III, Thepa ea Theknoloji
| PLC | Delta ea Taiwan |
| Mohloli oa skrineng sa ho ama (10.4 inch / Mmala) | Delta ea Taiwan |
| Enjene ea ho fepa (4.5kw) | Delta ea Taiwan |
| Sefuthumatsi | Jeremane |
| Setsi sa motlakase se tiileng | China |
| Contactor | Jeremane Siemens |
| Relay ea Thermo | Jeremane Siemens |
| Relay | Jeremane Weidmuller |
| Pompo ea vacuum | Busch R5 0100 |
| Moea oa moea | SMC ea Japane |
| Silinda | China |
Mehlala ea Litšoantšo
Litšoantšo tsa setshelo
